What’s your why? What’s your strategy? These are two key questions you should be asking yourself when marketing in the manufacturing industry. Too many people miss out on the great ways you can market your product and company in this industry and help your team out.
CNC machinery can have problems arise, and some of these problems are more common than others. When these problems occur, FlexCare+ steps in to get them resolved for you and back on track for new or current customers. These problems can include: # 1 Fixturing CNC machinery can have problems when the workpiece that is
We are happy to announce Landmark Solutions as the newest distributor of FlexCNC and FlexBeam in the West. Landmark is based out of Orange County, California, with coverage throughout Arizona, Oregon, Washington, Nevada, Idaho, Montana, and all of California. They pride themselves on being a professional manufacturing consulting, project management, and capital equipment distributor. The
The skills gap and labor shortage have been a hot topic in manufacturing in recent years. The challenge of being unable to find skilled workers with the needed technical skills, knowledge, or expertise to fill these open positions is a significant problem. A 2021 study conducted by Deloitte and the Manufacturing Institue (MI) predicts that
Watch Full Customer Story Below Staying competitive in the ever-changing manufacturing landscape requires continual investments in new technology. Businesses are often looking for solutions that will increase their capacity while giving them the ability to produce more consistent parts safely. Automation has become a hot topic in recent years, and for a good reason. Automating
Laser, plasma, and waterjet machines, often found in fab shops, are great for creating holes, but what about when those holes require threads? A secondary operation is necessary to achieve this, and the tools are often not ideal. Operators frequently use radial drills, handheld drills, hand tapping, or a CNC machine to tap the fabricated holes. These solutions are much less efficient and often less accurate than the FlexArm. The FlexArm tapping machine presents a solution that allows the operators to tap fabricated holes without refixturing their parts, breaking taps, or running costly CNC machines
HP |
Max RPM |
FT/LBS |
Series |
|---|---|---|---|
|
18 |
4000 |
92 |
C-20-02 / C-10-02 |
|
18 |
6000 |
61 |
C-20-02 / C-10-02 |
|
33 |
12000 |
61 |
CM-20-02 |
Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.
Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.
Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.
AC Unit Installed on Electrical Cabinet – The unit is mounted on the cabinet’s High Power (480v) side. It is close to the location where the drives are mounted. This option keeps the cabinet temperature stable and allows heat dissipation faster. The servo drives for all axes are the most significant contributors to heat inside the electrical cabinet.
5-Axis Renishaw Calibration – The calibration unit is a Renishaw model APCA45 with a modified spherical stylus. The device has a retractable cover and air purge to clear debris & dust during the activation process. It mounts to a swing arm controlled by a pneumatic rotary, so it is out of the way during regular operation and swings into the calibration position for calibration only.
HP |
Max RPM |
FT/LBS |
Series |
|---|---|---|---|
|
18 |
4000 |
92 |
G-20-06 / G-10-06 |
|
18 |
6000 |
61 |
G-20-06 / -10-06 |
|
40 |
4000 |
217 |
GM-20-06 / G-20-06 / G-10-06 |
|
40 |
6000 |
145 |
G-20-06 / G-20-06 / G-10-06 |
