In Episode 19 of Robotics in Manufacturing, Cyler goes over how easy it was to move our READY Robotics robot from our old shop to the new state-of-the-art FlexArm | FlexCNC headquarters.
In Episode 14 of Robotics in Manufacturing, our robot is tending our 5-axis machine by loading and then unloading the finished part in the unload bin.
In Episode 13 of Robotics in Manufacturing, we are nearing the final steps before we have our robot tending our 5-axis machine and running parts.
In Episode 12 of Robotics in Manufacturing, we address one major concern that companies often have when deciding to implement robotics in their shop.
Often times, people think that a robot in the machine shop is only justified if you are running tens of thousands of parts (or more). That couldn't be further from the truth.
We are going over the equipment on the end of arm.
In Episode 3 of Robotics in Manufacturing, Cyler goes into detail on how we are actuating three machine components with our robot.
In Episode 2 of Robotics in Manufacturing, Nick and Cyler go over how FlexArm is scaling for success by implementing READY Robotics into our shop.
Here's a look at the journey FlexArm will be taking to implement robotics in small-scale manufacturing thanks to a partnership with READY Robotics.