- Balance Arms (15)
- Blog (50)
- Custom Solutions (11)
- Die Grinding Arms (2)
- Ergonomic Problem Solving (35)
- Fireside Chats (3)
- FlexBeam (4)
- FlexCNC (38)
- FlexCNC C-Series (8)
- FlexCNC G-Series (19)
- FlexCNC Training (6)
- FlexJet (2)
- Horizontal Tapping (9)
- Hydraulic (35)
- Live Demos (21)
- Part Manipulator (17)
- Pneumatic (21)
- Robotics in Manufacturing (9)
- Tap Tests (33)
- Tapping Arms (46)
- Testimonials (9)
- Time Analysis (3)
- Torque Reaction Arms (6)
- Videos (2)
Lindsay Machine Works, Inc. has owned a FlexArm for 15 years. They recently purchased a hydraulic arm to handle larger tap capacities. See how many holes they can tap with the FlexArm in the same time it takes to hand tap one hole.
See how one manufacturer will increase productivity by using a FlexArm instead of their CNC to tap aluminum extrusions in a matter of seconds.
See how a hydraulic tapping arm compares to a pnuematic tapping arm when tapping 1/2" and 3/4" holes into 2" thick aluminum.
Looking to tap NPT threads in stainless steel tubing? So we set up the GH-24 tapping arm to tap the ⅛” NPT threads.
See why this facade contractor will be using a FlexArm instead of a drill press to tap their aluminum extrusions quicker and more efficiently.
Watch a GHM-60 Hydraulic FlexArm easily tap 1 1/4" holes in heat-treated alloy steel both vertically and horizontally with the multi-position head.
See How Easy It Is To Tap & Chamfer Holes Off OMAX Waterjet With a FlexArm.
A potential customer wanted to know whether or not a FlexArm tapping arm could tap some laser-cut holes in stainless steel, so they sent in their parts for us to perform a tap test. As you can tell, the GH-18 Hydraulic FlexArm had no problem with these holes.
A prospect was looking to free up their 5-axis machines by tapping offline. They are tapping into aluminum with a 7/8" full torque tap, while also tapping at 10.5- and 15-degree angles.
Finding the best and most efficient solution to thread T-Nuts to help with TE-CO's manufacturing process.
We had a customer send in some nuts for us to tap, so we put the GH-60 Hydraulic FlexArm tapping solution to the test.