Tapping 7/16” Holes into 3/8” Thick Steel
See how the FlexArm could improve the process of tapping holes into a 3/8” thick structural steel plate.
Prevent Tap Breakage in Alloy Steels
See how one user hopes to eliminate tap breakage and reduce tooling costs by switching to a FlexArm.
How to Tap Small Holes with the FlexArm
See how the FlexArm makes tapping easy, and is the best tool when it comes to small hole tapping.
Blind Hole Tapping
Watch us for a Blind Hole Tapping Live Stream. Watch the tapping demo and learn about the ROI of tapping parts off the CNC, Plasma, Waterjet, and Laser.
Difficulties of Tapping and Why it’s Easy with FlexArm
Tapping can be difficult and frustrating. From broken taps to damaged threads, the process of tapping can slow down productivity and become very costly in the long run.
NPT Tapping Live Stream with OSG
Watch us demo a wide range of NPT taps on the FlexArm. The OSG “tap expert” discusses the differences between the different NPT Pipe Taps used in the demo.
FlexArm Tapping Arm Live Stream with OSG
Watch Eddie showcase the A-32 Pneumatic Arm and the GH-45 Hydraulic Arm.
Horizontal Tapping on an A-32 Pneumatic Arm
See how easy it is to set up your A-32 Pneumatic Tapping Arm to tap in horizontal positions.
Taking Tapping Operations Offline to Tap Aluminum Extrusions
See how one manufacturer will increase productivity by using a FlexArm instead of their CNC to tap aluminum extrusions in a matter of seconds.
Tapping 1/2″ and 3/4″ Holes into 2″ Thick Aluminum
See how a hydraulic tapping arm compares to a pnuematic tapping arm when tapping 1/2" and 3/4" holes into 2" thick aluminum.
How Many Holes Can You Tap in 5 Minutes?
A recap of the 2019 Open House "For The Record" at FlexArm, as well as their attempt at breaking the world record for most holes tapped in 5 minutes.
Tapping Titanium 3D Printed Parts Offline
Tangible Solutions was tired of breaking taps and were ready to free up the CNC for other parts, so they're tapping offline with a FlexArm tapping arm.
Tapping with a Pneumatic vs. Hydraulic Arm: Choosing the Right Solution
FlexArm offers two main types of tapping arms: pneumatic and hydraulic-driven. But the question is, which one is better? Well, it depends on your situation.
Horizontal Tapping 1/4″ – 20 / 0.75″ Deep
We are demonstrating deep horizontal tapping by using a 1/4" - 20 / 0.75" deep tool.
3/4″ NPT Tap in Plastic Drip Tray
We used a 3/4" tap on a plastic drip tray for an industrial size air condition unit.
Tapping Engine Blocks for Paccar Engine Company
Watch how easy it is for the pneumatic A-32 FlexArm tapping arm to tap these engine blocks for Paccar Engine Company.