Production Tapping 1 ¾” Tire Rods
See how Adam Booth (Abom79) uses the FlexArm to make quick work out of Production Tapping 180 tire rods.
See how Adam Booth (Abom79) uses the FlexArm to make quick work out of Production Tapping 180 tire rods.
See how we can easily load and unload heavy parts into a 5-axis machine.
See how the FlexArm could improve the process of tapping holes into a 3/8” thick structural steel plate.
See how one user hopes to eliminate tap breakage and reduce tooling costs by switching to a FlexArm.
See how the FlexArm Die Grinder advances toolmaker's skills by 10 years.
See how one shop improved their tapping proocess by switching to a FlexArm.
See how the FlexArm makes tapping easy, and is the best tool when it comes to small hole tapping.
Watch us for a Blind Hole Tapping Live Stream. Watch the tapping demo and learn about the ROI of tapping parts off the CNC, Plasma, Waterjet, and Laser.
Learn how to error-proof your workstation with position control arms from DOGA.
Handheld grinders are powerful tools used in just about every metalworking environment. It is cumbersome and tiring work that puts considerable strain on the user. In a time where companies cannot afford lost time due to injuries, ergonomic solutions are now more important than ever.
Tapping can be difficult and frustrating. From broken taps to damaged threads, the process of tapping can slow down productivity and become very costly in the long run.
Launcher, a startup company out of New York, is developing the world’s most efficient rocket to deliver small satellites to orbit and FlexArm is partnering with them to make this happen.
Join us for a Live high-speed milling demo on the FlexCNC! We will be milling with Kyocera tooling and they will also be joining the live stream to discuss the various milling applications.
Watch us demo a wide range of NPT taps on the FlexArm. The OSG “tap expert” discusses the differences between the different NPT Pipe Taps used in the demo.
Watch Eddie showcase the A-32 Pneumatic Arm and the GH-45 Hydraulic Arm.
Lindsay Machine Works, Inc. has owned a FlexArm for 15 years. They recently purchased a hydraulic arm to handle larger tap capacities. See how many holes they can tap with the FlexArm in the same time it takes to hand tap one hole.
See how you can use the B-19 arm to counterbalance a 10 lb. tool. The tool is being used in a top-down fashion and needed the ability to move side to side.
See how this simple ergonomic solution prevents operator fatigue and repetitive motion injuries.
See how easy it is to set up your A-32 Pneumatic Tapping Arm to tap in horizontal positions.
See how a reaction plate can be integrated into a FlexArm for a simple torque reaction solution for tools with large amounts of torque.
See how one manufacturer will increase productivity by using a FlexArm instead of their CNC to tap aluminum extrusions in a matter of seconds.
See how one manufacturer will stop breaking taps by using a FlexArm to horizontally and vertically tap hard cast iron parts.
See how a hydraulic tapping arm compares to a pnuematic tapping arm when tapping 1/2" and 3/4" holes into 2" thick aluminum.
Looking to tap NPT threads in stainless steel tubing? So we set up the GH-24 tapping arm to tap the ⅛” NPT threads.
See why this facade contractor will be using a FlexArm instead of a drill press to tap their aluminum extrusions quicker and more efficiently.
Watch a GHM-60 Hydraulic FlexArm easily tap 1 1/4" holes in heat-treated alloy steel both vertically and horizontally with the multi-position head.
See How Easy It Is To Tap & Chamfer Holes Off OMAX Waterjet With a FlexArm.
Watch the FlexArm Hydraulic Tapping arm tap a 1 1/4" hole in a steel clevis part with special fixturing.
A recap of the 2019 Open House "For The Record" at FlexArm, as well as their attempt at breaking the world record for most holes tapped in 5 minutes.
Tangible Solutions was tired of breaking taps and were ready to free up the CNC for other parts, so they're tapping offline with a FlexArm tapping arm.