Flex Machine Tools Partners With Landmark Solutions

We are happy to announce Landmark Solutions as the newest distributor of FlexCNC and FlexBeam in the West. Landmark is based out of Orange County, California, with coverage throughout Arizona, Oregon, Washington, Nevada, Idaho, Montana, and all of California. They pride themselves on being a professional manufacturing consulting, project management, and capital equipment distributor.

The FlexCNC long bed vertical machining center includes features designed to eliminate spindle downtime. The open bed design makes loading and unloading parts quick and easy for the operator. The FlexCNC can handle an array of machining needs, both large and small. The FlexBeam is a beam drill line suited for structural fabrication shops that process steel profiles of varying lengths.

By adding the FlexCNC and FlexBeam to their vast current array of machine tools, Landmark Solutions will be able to provide an even broader product range to their customers. Businesses looking for solutions not easily achievable with a plasma cutter, waterjet, laser, or press break, may seek interest in the FlexCNC or FlexBeam. Flex Machines Tools is excited about this partnership and looks forward to bringing the FlexCNC and FlexBeam to the West.

About Landmark Solutions

Landmark Solutions and its team of industry experts have over 100 years of industry expertise. They currently offer lasers, plasma tables, waterjets, press breaks, and more. Their motto is “focus on providing the best-in-class equipment with best-in-class support to help our customers produce better quality parts at a lower price point with the most amount of up-time.” Learn more about Landmark Solutions here.

Leave a Reply

Your email address will not be published.

Standard Features

  • Hand Pendant
  • 22″ Touch Screen Monitor
  • Omron FlexCNC Controller
  • Mobile Control Panel
  • Through Spindle Coolant 
  • Auto Tool Changer 
  • Flood Coolant
HP
Max RPM
FT/LBS
Series

18

4000

92

C-20-02 / C-10-02

18

6000

61

C-20-02 / C-10-02

33

12000

61

CM-20-02

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.

AC Unit Installed on Electrical Cabinet – The unit is mounted on the cabinet’s High Power (480v) side. It is close to the location where the drives are mounted. This option keeps the cabinet temperature stable and allows heat dissipation faster. The servo drives for all axes are the most significant contributors to heat inside the electrical cabinet.

5-Axis Renishaw CalibrationThe calibration unit is a Renishaw model APCA45 with a modified spherical stylus. The device has a retractable cover and air purge to clear debris & dust during the activation process. It mounts to a swing arm controlled by a pneumatic rotary, so it is out of the way during regular operation and swings into the calibration position for calibration only. 

HP
Max RPM
FT/LBS
Series

18

4000

92

G-20-06 / G-10-06

18

6000

61

G-20-06 / -10-06

40

4000

217

GM-20-06 / G-20-06 / G-10-06

40

6000

145

G-20-06 / G-20-06 / G-10-06