FL-Series

F-Series

FLX-Series

FL- SERIES

The FL-Series waterjet delivers precision cutting with power and simplicity. This robust system boasts a helical rack and pinion system for exceptional accuracy and speed. Focusing on core functionality, the FL-Series offers a high-quality, no-frills solution for reliable cutting.

FL-0404 | FL-1004

    XYZ: 48" / 48" / 10" | 120" / 48" / 10"
   Abrasive Cutting system
   Install, Training, 1 Year Warranty
 

Speed / Accuracy

Repeatability .............................. 0.001 in.
Acceleration ......................................0.3G
Ballbar Circularity......................... <0.003
Maximum Traverse Speed ........ 1,400 in/min
Repeatability .......................... 0.001 in.
Acceleration .......................... 0.5G
Ballbar Circularity......................... <0.003
Maximum Traverse Speed ... 1,400 in/min

Standard Specifications

Abrasive Cutting System
Hand Pendant
22" Multi-touch Screen & Roll Around Control
Abrasive Hopper: 500 lb continuous fill
Material Support Slats: Galvanized Steel
Electrical Requirements: 3 Phase, 480V
User-Friendly Software
   30 HP 60,000 PSI Pump
▸ Multiple Cutting Heads

Optional Equipment

   Abrasive Bulk Hopper: 2500 lb Continuous fill
   AC Unit Installed on Electrical Cabinet
▸ Chiller
▸ Closed Loop System
▸ Garnet Removal
    Vacbox Vacuum Abrasive System
    Waterjet Brick
    Splash Guards

Z-Axis Options

Multiple Cutting Heads (two heads)
Automatic Edge Finder
Z-Reader
Tilter Head – ±45° Bevels and Taper Compensation with Auto Standoff
Rounder 5-Axis Calibrator
Straighter Perpendicular Calibrator
Snapper Vision System

Maintenance & Subscription

IGEMS Integrated CAD/CAM 3-Axis
IGEMS Integrated CAD/CAM 5-Axis
Nesting

Pump Upgrades

50 HP 60,000 PSI Intensifier Pump
50 HP HMI Integrated 60,000 PSI Intensifier Pump
60 HP HMI Integrated 90,000 PSI Intensifier Pump
100 HP HMI Integrated 60,000 PSI Intensifier Pump
Full Pressure Control

Resources

▸ 0404 2D Drawing
▸ 1004 2D Drawing

▸ Spec Sheet

Explore
Request A Quote
Designed for You

Engineered with user convenience in mind, the FLX waterjet showcases a thoughtful design that prioritizes easy maintenance. This user-friendly approach ensures an exceptional experience, increased productivity, and easy upkeep. 

Robust Design

With its robust design, the FLX Waterjet offers enhanced reliability and reduced maintenance needs. The machine’s exceptional structural integrity guarantees long-term durability, resulting in minimal downtime and reduced repair expenses.

Unmatched Service

High production waterjet cutting requires responsive service when you need it. Whether remote or in-person, our highly skilled service team will react quickly to provide you with the level of support you desire. 

100 % MANUFACTURED IN THE USA

REQUEST A QUOTE

For service please call
937-210-9541 or
Request Service Here

Standard Features

  • Hand Pendant
  • 22″ Touch Screen Monitor
  • Omron FlexCNC Controller
  • Mobile Control Panel
  • Through Spindle Coolant 
  • Auto Tool Changer 
  • Flood Coolant
HP
Max RPM
FT/LBS
Series

18

4000

92

C-20-02 / C-10-02

18

6000

61

C-20-02 / C-10-02

33

12000

61

CM-20-02

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.

AC Unit Installed on Electrical Cabinet – The unit is mounted on the cabinet’s High Power (480v) side. It is close to the location where the drives are mounted. This option keeps the cabinet temperature stable and allows heat dissipation faster. The servo drives for all axes are the most significant contributors to heat inside the electrical cabinet.

5-Axis Renishaw Calibration – The calibration unit is a Renishaw model APCA45 with a modified spherical stylus. The device has a retractable cover and air purge to clear debris & dust during the activation process. It mounts to a swing arm controlled by a pneumatic rotary, so it is out of the way during regular operation and swings into the calibration position for calibration only. 

HP
Max RPM
FT/LBS
Series

18

4000

92

G-20-06 / G-10-06

18

6000

61

G-20-06 / -10-06

40

4000

217

GM-20-06 / G-20-06 / G-10-06

40

6000

145

G-20-06 / G-20-06 / G-10-06