FlexJet Logo
Quality Parts, Fast

FL-Series

F-Series

FLX-Series

TThe F-Series Waterjet offers reliability, speed, and performance at a value. The all-steel rigid two-piece construction features a helical rack and pinion for faster acceleration and deceleration, higher accuracy, and increased longevity. The F-Series features a cantilever design giving you three-sided access for easy loading and unloading. With the adaptability to mount multiple cutting heads or a 5-axis cutting head, the F-Series is a reliable solution with advanced features designed to handle most cutting situations.

F-1065

 XYZ: 120″/ 78″ / 12″
 Abrasive Cutting system
 Install, Training, 3 Year Warranty
 
Build Your WaterJet

* Built to order sizes available in 5 ft increments.*

Speed / Accuracy

Repeatability ………………………… 0.001 in
Ballbar Circularity …………………<0.003 in.
Acceleration ………………………….. 0.3G
Maximum Traverse Speed …… 1,600 in/min
View Spec Sheet
Repeatability …………………….. 0.001 in.
Ballbar Circularity ……………… <0.003 in.
Acceleration …………………….. .3G
Maximum Traverse Speed … 1,600 in/min
View Spec Sheet

Standard Specifications

Abrasive Cutting System
Material  Support Slats: Steel
Abrasive Bulk Hopper: 500lb continuous fill
Electrical requirement: 3-Phase, 480 V
22″ Touch Screen HMI & Roll Around Control
Hand Pendant
CAD-CAM Express
▸ 50 HP 60,000 PSI Pump

Optional Equipment

   60,000 HMI Integrated Intensifier Pump
   Abrasive Bulk Hopper: 2500lb Continuous Fill
   Water Only No Abrasive
   AC Unit Installed on Electrical Cabinet
   Garnet Removal
▸ Water Level Control: 4″ rise
▸ Chiller
▸ Closed Loop System
▸ Garnet Removal
▸ Multiple Cutting Heads
▸ 5 Axis Head

Drawings

▸ 2D Drawing

Videos

▸ Multiple Cutting Heads
▸ 5 Axis Head
Quality Parts, Fast

With the fastest rapids in its class, the FL-Series offers greater efficiency for less time per part. This fast yet highly accurate cutting solution offers versatility at a value.

Built to Last

Designed and constructed using tried and true technology, the FL-Series is a dependable cutting solution built to last. The all-steel two-piece construction features a helical rack and pinion for higher accuracy and increased longevity.

Unmatched Service

Highly experienced service technicians there when you need them. From installation and training to preventative maintenance and consumable packages, we offer a level of service you can rely on.

100 % MANUFACTURED IN THE USA

WATERJET SERVICE

With Flex, we don’t just provide you with a service; we’re your dedicated partners in optimizing your productivity. Our approach revolves around your needs, guided by a team of seasoned service engineers who stand ready to deliver solutions and minimize downtime quickly. We understand the importance of keeping your machinery operational, which is why our nationwide network ensures expert assistance no matter your location. With over 20 years of accumulated experience, coupled with ongoing training, our service experts excel in tackling the ever-evolving challenges of the industry. And to ensure your equipment remains at its best, we offer comprehensive maintenance packages that seamlessly enhance your operational experience.

Service Package

"When you invest in a FlexJet, you will get a high-quality, high-performance waterjet system that comes with a level of service you can rely on."

Request a Quote

For service please call
1-800-837-2503 or
Request Service Here

Standard Features

  • Hand Pendant
  • 22″ Touch Screen Monitor
  • Omron FlexCNC Controller
  • Mobile Control Panel
  • Through Spindle Coolant 
  • Auto Tool Changer 
  • Flood Coolant
HP
Max RPM
FT/LBS
Series

18

4000

92

C-20-02 / C-10-02

18

6000

61

C-20-02 / C-10-02

33

12000

61

CM-20-02

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.

AC Unit Installed on Electrical Cabinet – The unit is mounted on the cabinet’s High Power (480v) side. It is close to the location where the drives are mounted. This option keeps the cabinet temperature stable and allows heat dissipation faster. The servo drives for all axes are the most significant contributors to heat inside the electrical cabinet.

5-Axis Renishaw Calibration – The calibration unit is a Renishaw model APCA45 with a modified spherical stylus. The device has a retractable cover and air purge to clear debris & dust during the activation process. It mounts to a swing arm controlled by a pneumatic rotary, so it is out of the way during regular operation and swings into the calibration position for calibration only. 

HP
Max RPM
FT/LBS
Series

18

4000

92

G-20-06 / G-10-06

18

6000

61

G-20-06 / -10-06

40

4000

217

GM-20-06 / G-20-06 / G-10-06

40

6000

145

G-20-06 / G-20-06 / G-10-06