Tap Holders and Accessories

Tap Holders and Accessories

Request A Quote
Drill Chuck Quick Change Adapter: 3/8”/1/2”/5/8”

Drill Chuck Quick Change Adapter: 3/8”/1/2”/5/8”

Chuck

2D Drawing

Video

Buy Now

Die Holder Quick Change Adapter for External Threading

Die Holder Quick Change Adapter for External Threading

External Threading

2D Drawing 1" Die Holder

2D Drawing 1.5" Die Holder

2D Drawing 2" Die Holder

2D Drawing 2.5" Die Holder

Video

Size 1 Fixed Tap Holders for Holding Large Taps in Size 1 Chuck

Size 1 Fixed Tap Holders for Holding Large Taps in Size 1 Chuck

Special Tap Holders

2D Drawing

Custom Tap Adapters for Large Taps

Special Tap Adapters for Large Taps

Special Tap Adapter

2D Drawing

Video

Size 1, 2, 3, 4 Clutch Tap Holders Fixed Tap Holders

Size 1, 2, 3, 4 Clutch Tap Holders Fixed Tap Holders

Tap Holder Clutch

2D Drawing

Brochure

Video

Buy Now

Dead Handle for Drilling. Model: A-32/S-36/M-60/ RNR-20

Dead Handle for Drilling. Model: A-32/S-36/M-60/ RNR-20

Chamfering & Drilling

2D Drawing

Socket Drive Extension

Socket Drive Extension

1/4 Socket Drive Extension Light Torque

1/4 Socket Drive Extension

3/8 Socket Drive Extension

1/2 Socket Drive Extension

Tap Holder Stand

Tap Holder Stand

A FlexArm Tap Holder Stand keeps tooling and tap holders handy, clean, and organized. This convenient stand holds size-1 & size-2 tap holders.

2D Drawing

3D Drawing

REQUEST A

FREE QUOTE

Let's start making your shop more money by increasing your efficiency when tapping.

REQUEST A QUOTE

FLEXARM VIDEOS & BLOGS

Join our 20,000+ Satisfied Customers

Previous
Next

For service please call
1-800-837-2503.

25 DAYS OF SAVINGS

We're counting down the savings with huge discounts on the FlexCNC C-20-02.


Act Fast to Get the Best Deal!

See Today's Discount
Days
Hours
Minutes
Seconds

Standard Features

  • Hand Pendant
  • 22″ Touch Screen Monitor
  • Omron FlexCNC Controller
  • Mobile Control Panel
  • Through Spindle Coolant 
  • Auto Tool Changer 
  • Flood Coolant
HP
Max RPM
FT/LBS
Series

18

4000

92

C-20-02 / C-10-02

18

6000

61

C-20-02 / C-10-02

33

12000

61

CM-20-02

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.

AC Unit Installed on Electrical Cabinet – The unit is mounted on the cabinet’s High Power (480v) side. It is close to the location where the drives are mounted. This option keeps the cabinet temperature stable and allows heat dissipation faster. The servo drives for all axes are the most significant contributors to heat inside the electrical cabinet.

5-Axis Renishaw Calibration – The calibration unit is a Renishaw model APCA45 with a modified spherical stylus. The device has a retractable cover and air purge to clear debris & dust during the activation process. It mounts to a swing arm controlled by a pneumatic rotary, so it is out of the way during regular operation and swings into the calibration position for calibration only. 

HP
Max RPM
FT/LBS
Series

18

4000

92

G-20-06 / G-10-06

18

6000

61

G-20-06 / -10-06

40

4000

217

GM-20-06 / G-20-06 / G-10-06

40

6000

145

G-20-06 / G-20-06 / G-10-06