REDUCE OPERATOR ERROR AND INJURY WITH FLEXARM'S TORQUE REACTION ARMS.

Create Your Custom Ergonomic Solution

Download Form

Torque Reaction Arms

Create Your Own
Ergonomic Solution

The examples provided are simply a selection of custom solutions we have provided in the past.  We understand that every work environment is different, and we pride ourselves on our ability to provide customized solutions that improve efficiency and worker comfort. If you have an ergonomic challenge, please contact us as we are always open to discussing and evaluating any new application or project you may have.

Fill out custom
tool mount application

G-30 with Custom Mount for Right Angle Tool

Horizontal fastening

Max Torque: 150 ft-lbs

Tool Weight: 24 lb

G-36 with Custom Mount for Inline Tool

Horizontal fastening

Max Torque: 400 ft-lbs

Tool Weight: 25 lb

G-36 with Custom Mount for Pistol Grip Tool

Horizontal fastening

Max Torque: 400 ft-lbs

Tool Weight: 17 lb

G-30 with Custom Mount for Right Angle

Vertical Down Fastening

Max Torque: 150 ft-lbs

Tool Weight: 18 lb

Custom Arm and Mount for Right Angle Tool

Horizontal fastening

Custom configuration for fastening bolts under a vehicle.

Max Torque: 300 ft-lbs

Tool Weight: 28 lb

No Pain.
Their Gain

Torque Tools can have incremental, but harmful effects on an operator’s wrists, elbows, and other joints.  Keep your team safe and moving with a FlexArm.

Increase
Part Quality

With less stress on the operator’s hands, they can more easily move, hold, and direct their tools. When they can better hold the tool, it greatly increases their ability to produce a quality part.

Put the Power
in Their Hands

Don’t limit your operations solely on human capability. Give your operators confidence when handling those tough torque tools with our ergonomically designed Torque Reaction Arms.

Fill Out a custom Tool Mount Application Today!

If you have any further questions please contact our Ergonomic Sales Manager at cmiller@flexarminc.com.

Click Here for Application

Standard Features

  • Hand Pendant
  • 22″ Touch Screen Monitor
  • Omron FlexCNC Controller
  • Mobile Control Panel
  • Through Spindle Coolant 
  • Auto Tool Changer 
  • Flood Coolant
HP
Max RPM
FT/LBS
Series

18

4000

92

C-20-02 / C-10-02

18

6000

61

C-20-02 / C-10-02

33

12000

61

CM-20-02

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.

AC Unit Installed on Electrical Cabinet – The unit is mounted on the cabinet’s High Power (480v) side. It is close to the location where the drives are mounted. This option keeps the cabinet temperature stable and allows heat dissipation faster. The servo drives for all axes are the most significant contributors to heat inside the electrical cabinet.

5-Axis Renishaw Calibration – The calibration unit is a Renishaw model APCA45 with a modified spherical stylus. The device has a retractable cover and air purge to clear debris & dust during the activation process. It mounts to a swing arm controlled by a pneumatic rotary, so it is out of the way during regular operation and swings into the calibration position for calibration only. 

HP
Max RPM
FT/LBS
Series

18

4000

92

G-20-06 / G-10-06

18

6000

61

G-20-06 / -10-06

40

4000

217

GM-20-06 / G-20-06 / G-10-06

40

6000

145

G-20-06 / G-20-06 / G-10-06