Waterjet machines built in Wapakoneta, Ohio, deliver industry-leading speed and precision across steel, aluminum, stone, glass, and composite. Backed by a team that actually picks up the phone.
Machines starting at $145,000
Tell us what you’re cutting and we’ll come back with a configured system and pricing. No pressure, financing terms up to 8 years.
• Response within one business day
• No obligation, no hard sell
• Financing options included with every quote
• Real specs, real lead times
Multiple sizes. All built in the USA.
Table Sizes 4 x 4 | 10 x 4
Table Sizes 4 x 4 | 10 x 4
Repeatability .001″
Repeatability .001″
Circularity <.003″
Circularity <.003″
Z-Axis Travel 10″
Z-Axis Travel 10″
Heads Available Conventional / 5-Axis
Heads Available Conventional / 5-Axis
Ideal for job shops and smaller production environments that need precision waterjet cutting without a large footprint.
Table Sizes 5×6 | 10×6.5 | 15×6.5
Table Sizes 5×6 | 10×6.5 | 15×6.5
Repeatability .001″
Repeatability .001″
Circularity <.003″
Circularity <.003″
Z-Axis Travel 12″
Z-Axis Travel 12″
Heads Available Conventional / Tilter/
Heads Available Conventional / Tilter/
5-Axis/ 4-Head
The most versatile FlexJet series. Multiple size options and the broadest head selection for the widest range of production applications.
Table Sizes 13×6.5 | 13×8
Table Sizes 13×6.5 | 13×8
Repeatability .001″
Repeatability .001″
Circularity <.003″
Circularity <.003″
Z-Axis Travel 12″
Z-Axis Travel 12″
Heads Available Conventional / Tilter/
Heads Available Conventional / Tilter/
5-Axis/ 4-Head
Built for shops cutting large-format material. The FLX handles big parts without sacrificing the accuracy FlexJet is built on.
Table Sizes 5 ft increments
Table Sizes 5 ft increments
Repeatability .001″
Repeatability .001″
Circularity <.003″
Circularity <.003″
Configuration Built to Spec
Configuration Built to Spec
Heads Available All Options
Heads Available All Options
If no standard configuration fits your floor plan or application, we build it. Custom sizes, custom setups, engineered around what you need.
Choose from four cutting head options, each designed to fit different needs.
Taper Compensation
Water Only & Abrasive Option
Water Only & Abrasive Option
VECTRON – Direct Drive
30 HP | 55,000 psi
ECOTRON – Single Hydraulic Intensifier
15-60 HP | 61,000 psi
HYTRON – Dual Hydraulic Intensifier
75-100 HP | 61,000 psi
SERVOTRON – Hybrid Servo Intensifier
50-60 HP | 61,000 psi
HYPERTRON – Single Hydraulic Intensifier
75 HP | 90,000 psi
“My main deciding factor would be after-sales support and service. The ability to get parts, and have parts readily available. Being able to get that spindle uptime back up is a real deciding factor for me.”
– Corey Mays, President, CM Weld and Machine
Standard Configuration
Know roughly what you need? Tell us your application and a FlexJet specialist will follow up with a configuration and pricing within one business day.
Standard Configuration
Unique setup, unusual material, or a process standard machines haven’t handled? Our engineering team will review your application and tell you exactly what FlexJet can do.
Place material anywhere on the bed. The Snapper photographs it and loads a true-to-scale image straight into the software. Drag your toolpath onto the picture and go.
See the scrap, the pre-drilled holes, the clamps, right on screen. Position parts around them instead of guessing, and waste less material doing it.
Whatever’s on the bed, the Snapper removes the guesswork from positioning material so you’re cutting faster.
Some machines need a technician on site for a full day to recalibrate. The Rounder measures the head’s actual motion and dials it in on the spot, in about 15 minutes.
ROUND HOLES THAT ARE ACTUALLY ROUND
Small mechanical errors in the 5-axis head throw off bevel cuts. The Rounder measures it and dials it out, so bevel cuts come out true.
Comes standard with the Tilter head. No extra hardware, no guesswork.
Build toolpaths from STEP, STL, or IGES files, with 3D collision simulation before the head touches material.
Multiple heads, multiple sheets, common cutlines between parts. Less material wasted per job.
GEMS reads ORD files natively. No redrawing every part you’ve already cut.
Every wear part sits where a tech can reach it. Routine maintenance takes minutes, not a half-day teardown, so the pump is back to work fast.
Size doesn’t cost you pressure. The pump delivers the flow your cutting head needs, shift after shift.
From 30 to 100 horsepower and up to 90,000 psi, across direct drive, intensifier, and servo options, there’s a configuration built for what you’re actually cutting.
VECTRON – Direct Drive
30 HP | 55,000 psi
ECOTRON – Single Hydraulic Intensifier
15-60 HP | 61,000 psi
HYTRON – Dual Hydraulic Intensifier
75-100 HP | 61,000 psi
SERVOTRON – Hybrid Servo Intensifier
50-60 HP | 61,000 psi
HYPERTRON – Single Hydraulic Intensifier
75 HP | 90,000 psi
Some manufacturers phase out support the moment a new model ships. FlexJet backs every machine for life, not just the years it’s the current model.
When something breaks, we don’t stop at finding the cause. We take the problem on and follow it through until it’s actually fixed.
When something breaks, we don’t stop at finding the cause. We take the problem on and follow it through until it’s actually fixed. The machine-to-service tech ratio is 11:1.
No scrambling for parts on a machine that’s a few years old. If FlexJet built it, FlexJet supports it.
