Used Ergonomics Arms Like New

In the market for a comfortable and adjustable workspace solution? Look no further than a used, refurbished ergonomic arm! These arms offer excellent value, providing the same functionality as new ones at a fraction of the cost. With a refurbished arm, you can easily adjust your monitor to the perfect height and position, reducing neck and back strain throughout the workday.  Remember, a refurbished arm has been inspected and repaired to ensure it functions properly, so you can be confident in your purchase!

Refurbished Ergonomic Arms

Standard 1-year warranty valid on used and refurbished ergonomic arms purchased through the manufacturer. 

TORQUE REACTION ARMS

G-60

G-60 Arm Only

SN: 019329

Torque: 800 ft/lbs
Reach: 20″-84″
Counterbalance Capacity: 5-45 lbs, 46-75lbs Optional

$6,980.00

$5,495.00

PART MANIPULATOR ARMS

PM-44-S Part Manipulator

PM44-S

SN:027194

Reach: 16″ – 113″
Vertical Stroke: 52″
Lift Capacity: 0-90 lbs
Air: 90 PSI

$6,360.00

$5,495.00

Part Manipulator Arms PM-22-S PM-22-A

PM22-S

SN:032321

Reach: 16″-64″
Vertical Stroke: 23″
Lift Capacity: 0-200 lbs
Air: 90 PSI

$5,820.00

$4,995.00

BALANCE ARM

Ergonomic Balance Arm

B-33 Vertical V-Block
Tool Mount

SN: 033212

Counterbalance Capacity: 1-40 lbs
Reach: 10″ – 53″
Air: 90 PSI

$2,500

$1,995.00

B-33-RG Rotational Gimbal
w/ Adjustable Pedestal

SN: 033360

Counterbalance Capacity: 1-25 lbs
Reach: 1″ – 72″
Air: 90 PSI

$3,865

$3,095.00

Request your Refurbished Ergonomic Arm Today!

Standard Features

  • Hand Pendant
  • 22″ Touch Screen Monitor
  • Omron FlexCNC Controller
  • Mobile Control Panel
  • Through Spindle Coolant 
  • Auto Tool Changer 
  • Flood Coolant
HP
Max RPM
FT/LBS
Series

18

4000

92

C-20-02 / C-10-02

18

6000

61

C-20-02 / C-10-02

33

12000

61

CM-20-02

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.

AC Unit Installed on Electrical Cabinet – The unit is mounted on the cabinet’s High Power (480v) side. It is close to the location where the drives are mounted. This option keeps the cabinet temperature stable and allows heat dissipation faster. The servo drives for all axes are the most significant contributors to heat inside the electrical cabinet.

5-Axis Renishaw CalibrationThe calibration unit is a Renishaw model APCA45 with a modified spherical stylus. The device has a retractable cover and air purge to clear debris & dust during the activation process. It mounts to a swing arm controlled by a pneumatic rotary, so it is out of the way during regular operation and swings into the calibration position for calibration only. 

HP
Max RPM
FT/LBS
Series

18

4000

92

G-20-06 / G-10-06

18

6000

61

G-20-06 / -10-06

40

4000

217

GM-20-06 / G-20-06 / G-10-06

40

6000

145

G-20-06 / G-20-06 / G-10-06