HYDRAULIC TAPPING ARMS
When your machining center isn’t milling, drilling, or boring, it’s costing your company money. Tapping is and efficient and costly CNC operation best done by the FlexArm. Using the FlexArm in conjunction with your machining center saves money, time, tools, and materials.
|SERIES||REACH||TAP CAPACITY||MAX TORQUE||SPEED OPTIONS|
|G-18||14"-72"||#6-5/8"||59 ft/lbs.||100-420 RPM|
|GH-24||20"-76"||#6-7/8"||78 ft/lbs.||100-500 RPM|
|GH-30||20"-76"||#6-1-1/4"||188/63 ft/lbs.||140-500 RPM|
|GH-45||20"-78"||1/4"-1-1/2"||325/63 ft/lbs.||110-500 RPM|
|GH-60||20"-85"||1/4"-2"||811/162 ft/lbs.||55-275 RPM|
Digital Depth Control
Digital Depth Control allows the operator to control depth and pitch of your tapped hole and maintain consistency, making quality control simple and automatic.
GH-24 • GH-30 • GH-45 • GH-60
Stepless Quick Clamps
Reduce set-up time with theReduce set-up time with the stepless quick clamps. Position, clamp and tap.
ISO VG-32 Hydraulic Oil for Air Motor (Gallon)
Acculube Tap Lubricant (Gallon) LB-2000
Medium to heavy duty machining fluid.
Automatic Depth Stop
Torque Quick Change Holders (Size 1)
Torque Quick Change Holders (Size 2)
RNR 20 • RNR M20
Torque Quick Change Holders (Size 3)
GH-30 • GH-45 • GH-60
Torque Quick Change Holders (Size 4)
GH-45 • GH-60
Large Spanner Wrench
Adjusts the tension on size 3 and 4 Torque Holders
The chuck reducer allows the use of smaller diameter tap holders in large chucks.
Die Holders apply external threads – size 1 adapter. To use with an RNR a 2:1 reducer is needed.
Use the Jacob’s Chuck to for chamfering, reaming and light drilling. Add the dead handle for additional leverage. These are size 1, to use with an RNR a 2:1 reducer is needed.