Model: Detector 101

The broken tool detectors type 101 are used to detect a break of tool or the presence or absence of a part. Each cycle, the detector needle contacts the tool to sense its presence.

Feed: 126°

Min. Diameter of the Tool: 1,5 mm

Max. Length to the Tool Axis: 200 mm

Response Time: 50 ms

Required Pressure: Min. 5 Bar

Operating Temperature: 10°C-60°C

Model: Detector 110

The broken tool detectors type 110 are used to detect a break of tool or the presence or absence of a part. Each cycle, the detector needle contacts the tool to sense its presence.

Feed: 126°

Min. Diameter of the Tool: 0,5 mm

Max. Length to the Tool Axis: 120 mm

Response Time: 50 ms

Required Pressure: Min. 5 Bar

Operating Temperature : 10 °C -60°C

Model: Detector 202

The broken tool detectors type 202 are used to detect a break of tool or the presence or absence of a part. Each cycle, the detector needle contacts the tool to sense its presence.

Feed: 90°

Min. Diameter of the Tool: 0,8 mm

Max. Length to the Tool Axis: 80 mm

Response Time: 50 ms

Required Pressure: Min. 4 bar

Operating Temperature: 10°C-60°C