Main Menu

Contact Us

Request A Quote

Support

Search

2 AVAILABLE

FL-1004

120” x 48” x 10”

/  Conventional Cutting Head

/  50HP, 60,000 pump

/  2 Year Warranty

/ 8 Week Lead Time

Repeatability ................................ 0.001 in
Ballbar Circularity ....................<0.003 in.
Acceleration ......................................0.3G
Maximum Traverse Speed ........... 600 ipm

PAYMENT AS LOW AS

$2,550 / mo*

GET THIS MACHINE

1 AVAILABLE

FL-1004

120” x 48” x 10”

/  Titler Head ±45° with taper compensation

/   Rounder 5-Axis Calibrator

/   Straighter Perpendicular calibrator

/  50 HP, 60,000 pump

/  2 Year Warranty

/  8 Week Lead Time

Repeatability ............................ 0.001 in
Ballbar Circularity ....................<0.003 in.
Acceleration ....................................0.3G
Maximum Traverse Speed ............600 ipm

PAYMENT AS LOW AS

$3,187 / mo*

GET THIS MACHINE

1 AVAILABLE

F-1065

120” x 78” x 12”

/   Titler Head ±45° with taper compensation

/  Rounder 5-Axis Calibrator

/  Straighter Perpendicular calibrator

/  50 HP, 60,000 pump

/  2 Year Warranty

/ 8 Week Lead Time

Repeatability ............................ 0.001 in
Ballbar Circularity ....................<0.003 in.
Acceleration ....................................0.3G
Maximum Traverse Speed ........... 600 ipm

PAYMENT AS LOW AS

$3,694 / mo*

GET THIS MACHINE

2 AVAILABLE

FLX-1365

156” x 78” x 12”

/  Titler Head ±45° with taper compensation

/ Rounder 5-Axis Calibrator

/  Straighter Perpendicular calibrator

/  50 HP, 60,000 pump

/  2 Year Warranty 

/  8 Week Lead Time

Repeatability ............................ 0.001 in
Ballbar Circularity ....................<0.003 in.
Acceleration ....................................0.3G
Maximum Traverse Speed ........... 600 ipm

PAYMENT AS LOW AS

$4,769 / mo*

GET THIS MACHINE
ADVANCED TECHNOLOGY.

Complete Support.

Flex brings together cutting technology, high-pressure systems, service and more to help you get the most from your waterjet.

Section 179

WRITE OFF THE FULL PRICE THIS YEAR

A Flexjet placed into service before December 31 can be deducted in full this year instead of being depreciated over time. Paired with $0 down and 0 % financing. The write-off can land the same year the machine starts paying for itself.

SEE HOW IT WORKS

**Direct sales only. 0% APR/12mo and 2.99% APR/24mo subject to credit approval, qualifying applicants only. $0 down at signing. Not combinable with other offers. Accessories beyond those listed may extend the 8-week lead time. Monthly payments shown reflect the 7.55% APR/84-month rate and are only calculated on machine configuration shown. Section 179 information is general, not tax advice, confirm with your accountant.**

Request A Machine

Main Menu

Main Menu

Snapper Vision System

See exactly where the cut lands

The Snapper photographs the cutting table in detail, then lets you drag and drop the job onto that image to position it on the material. The result feeds straight into the NC program, cutting programming time and material waste.


Snap a photo. Start cutting.

Place material anywhere on the bed. The Snapper photographs it and loads a true-to-scale image straight into the software. Drag your toolpath onto the picture and go.

Nest around what's actually there

See the scrap, the pre-drilled holes, the clamps, right on screen. Position parts around them instead of guessing, and waste less material doing it.

Full sheets or drop-offs, it doesn't matter

Whatever’s on the bed, the Snapper removes the guesswork from positioning material so you’re cutting faster.

 

Rounder Kinematic Compensation

15-minute calibration, no technician

The Rounder measures multiple points on the bevel kinematic to account for mechanical deviation, then compensates automatically. Full 5-axis calibration in about 15 minutes, in-house.

 

Calibrated in 15 minutes flat.

Some machines need a technician on site for a full day to recalibrate. The Rounder measures the head’s actual motion and dials it in on the spot, in about 15 minutes.

 

ROUND HOLES THAT ARE ACTUALLY ROUND

Small mechanical errors in the 5-axis head throw off bevel cuts. The Rounder measures it and dials it out, so bevel cuts come out true.

Plug in. Calibrate. Done.

Comes standard with the Tilter head. No extra hardware, no guesswork.

Straighter

A true perpendicular, every time

The Straighter clips onto the machine’s mixing tube to hold the 5-axis kinematic perpendicular angle exactly true, keeping bevel cuts consistent across the full range of motion.

 

IGEMS CAD/CAM

Familiar software, built for waterjet

An AutoCAD-style interface for 2D and 3D design, with automatic nesting that arranges parts on the sheet to minimize scrap. The IGEMS HMI sits on top, showing tool status, machine vitals, and controls in one place.

Switching machines? Bring your files with you.

GEMS reads ORD files natively. No redrawing every part you’ve already cut.

Program 5-axis without a specialist

Build toolpaths from STEP, STL, or IGES files, with 3D collision simulation before the head touches material.

NESTING THAT THINKS PAST ONE SHEET

Multiple heads, multiple sheets, common cutlines between parts. Less material wasted per job.

HIGH PRESSURE PUMPS

More Floor Space

A smaller footprint means it fits into tighter spaces on the shop floor, without giving up the pressure and flow your cutting head needs.

Less downtime, less hassle

Every wear part sits where a tech can reach it. Routine maintenance takes minutes, not a half-day teardown, so the pump is back to work fast.

Pressure that doesn't quit

Size doesn’t cost you pressure. The pump delivers the flow your cutting head needs, shift after shift.

 

Built for the full range of jobs

From 30 to 100 horsepower and up to 90,000 psi, across direct drive, intensifier, and servo options, there’s a configuration built for what you’re actually cutting.

 SERVICE

 Support That Doesn’t Expire

Some manufacturers phase out support the moment a new model ships. FlexJet backs every machine for life, not just the years it’s the current model.

We solve it, not diagnose it

When something breaks, we don’t stop at finding the cause. We take the problem on and follow it through until it’s actually fixed.

Enough techs to actually know you

When something breaks, we don’t stop at finding the cause. We take the problem on and follow it through until it’s actually fixed.

NEVER A DISCOUNTED MODEL

No scrambling for parts on a machine that’s a few years old. If FlexJet built it, FlexJet supports it.